China Permanent Magnet 20140717
Custom Neodymium Rare Earth Magnets
Looking for China Neodymium Rare Earth Magnets for Motors & Bearings:
I would like a quote to make the four sets of permanent magnets shown in the below drawings:
---fifty arc magnets (14mm inner radius; 24.5mm outer radius; 1mm thickness; 35.5* angle; grade N50 polarized through axial thickness; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
---ten ring magnets (41mm ID; 49mm OD; 1.2mm thickness; grade N48 polarized axially; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
---ten ring magnets (29.5mm ID; 35.5mm OD; 1.2mm thickness; grade N48 polarized axially; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
---ten ring magnets (27mm ID; 35mm OD; 1.2mm thickness; grade N48 polarized axially; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
The arc magnets are for a small motor, and the ring magnets are for magnetic bearings. We would like to have these in 3 to 5 weeks.
Inquire Neodymium Magnet Manufacturer China Rare Earth Magnet Limited:
I am not a magnet expert so I would like your advice on choosing the right permanent magnet materials. I have attached an image containing the dimensions and some of the criteria I need. Please point me in the right direction so I can choose the best materials and best coating.
Here is what I need:
1- Magnets are as powerful as possible like sintered NdFeB magnet.
2- Magnets that are solid, that will not break too easily.
3- Magnets that resist de-magnetization at high heat.
The dimensions and quantities are specified on the drawings.
Inquire Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
I am looking for neodymium arc magnets for a rotor (diameter = 10cm) of a Yamaha R1 (model 2004). I am interested in such magnets (half with North pole inside and half with South pole inside). The size I'm looking for is 3892 mm. I would like to ask if you ship those magnets to Greece. How much will it cost and how long will it take.
Looking for China Neodymium Rare Earth Magnets for Motors & Bearings:
I would like a quote to make the four sets of permanent magnets shown in the below drawings:
---fifty arc magnets (14mm inner radius; 24.5mm outer radius; 1mm thickness; 35.5* angle; grade N50 polarized through axial thickness; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
---ten ring magnets (41mm ID; 49mm OD; 1.2mm thickness; grade N48 polarized axially; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
---ten ring magnets (29.5mm ID; 35.5mm OD; 1.2mm thickness; grade N48 polarized axially; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
---ten ring magnets (27mm ID; 35mm OD; 1.2mm thickness; grade N48 polarized axially; NdFeB; 4-50*C temperature; tight tolerancing; thin NiCuNi coating)
The arc magnets are for a small motor, and the ring magnets are for magnetic bearings. We would like to have these in 3 to 5 weeks.
Inquire Neodymium Magnet Manufacturer China Rare Earth Magnet Limited:
I am not a magnet expert so I would like your advice on choosing the right permanent magnet materials. I have attached an image containing the dimensions and some of the criteria I need. Please point me in the right direction so I can choose the best materials and best coating.
Here is what I need:
1- Magnets are as powerful as possible like sintered NdFeB magnet.
2- Magnets that are solid, that will not break too easily.
3- Magnets that resist de-magnetization at high heat.
The dimensions and quantities are specified on the drawings.
Inquire Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
I am looking for neodymium arc magnets for a rotor (diameter = 10cm) of a Yamaha R1 (model 2004). I am interested in such magnets (half with North pole inside and half with South pole inside). The size I'm looking for is 3892 mm. I would like to ask if you ship those magnets to Greece. How much will it cost and how long will it take.
