SmCo Magnet
Permanent Magnet SmCo, Neodymium Iron Boron
Client of 3.5+/-0.1 x 3.5+/-0.1 x 4+/-0.1 mm SmCo Magnets:
Would you please offer your best price and lead time for the following SmCo block magnet:
SmCo Rare Earth Permanent Magnet
3.5+/-0.1 x 3.5+/-0.1 x 4+/-0.1 mm; edges slightly rounded -0.1 to -0.2 (sharp edged is also accepted)
Magnetized through 4 mm; Maximum working temperature 80°C
Client of Neodymium Permanent Magnets:
Would you please offer your best price and lead time for the following neodymium ring magnet no. 378-01:
Neodymium iron boron magnets in accordance with the attached drawing
Br = 1,080 to 1,200 mT; Hcb > 812 kA/m; Hcj > 2,387 kA/m; Maximum working temperature Tw = 165°C; Tc(Br) = -0.095 %/K Tc(Hcj) = -0,55 %/K; Max. permissable irreversible loss of magnetic flux up to 165°C <=1%; Magnetized through the height of 6 mm; Ni-Cu-Ni coated (16µ-8µ-12µ); All edges rounded as requested Lot size min. 150,000pcs (annual need between 300k to 2,300kpcs)
For permanent magnet sampling we need 500pcs or alternative 1,000pcs (please do not forget to offer your price and lead time based on express door to door)
Client of Neodymium Arc Magnets:
Would you please check your current best price and lead time of magnet 40 based on 25.000pcs per year and 5k per lot or based on your own recommendation regarding the lot size? Neodymium iron boron permanent magnets should be supplied magnetized and vacuum packed. Please inform about the validity period of your offer too.
Client of SmCo Magnets for High Vacuum Technology:
We are asked by our customer if we can supply the following SmCo magnets:
D12-0.1 x 18-0.1 mm; Coated with titanium (Ti) and gold (Au). The coating should be made by vaporisation technique. The total thickness of Ti+Au should be 5-10 µm (=0.005 to 0.010 mm). These magnets shall be used for high vacuum technology. What do you think? Can you realise it? There is only a need of a small quantity.
SmCo Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
Thank you for your enquiry. I am sorry to tell you that we can't make SmCo magnet with a coating Ti+Au. We always manufacture SmCo Magnets without coating.
Client of 3.5+/-0.1 x 3.5+/-0.1 x 4+/-0.1 mm SmCo Magnets:
Would you please offer your best price and lead time for the following SmCo block magnet:
SmCo Rare Earth Permanent Magnet
3.5+/-0.1 x 3.5+/-0.1 x 4+/-0.1 mm; edges slightly rounded -0.1 to -0.2 (sharp edged is also accepted)
Magnetized through 4 mm; Maximum working temperature 80°C
Client of Neodymium Permanent Magnets:
Would you please offer your best price and lead time for the following neodymium ring magnet no. 378-01:
Neodymium iron boron magnets in accordance with the attached drawing
Br = 1,080 to 1,200 mT; Hcb > 812 kA/m; Hcj > 2,387 kA/m; Maximum working temperature Tw = 165°C; Tc(Br) = -0.095 %/K Tc(Hcj) = -0,55 %/K; Max. permissable irreversible loss of magnetic flux up to 165°C <=1%; Magnetized through the height of 6 mm; Ni-Cu-Ni coated (16µ-8µ-12µ); All edges rounded as requested Lot size min. 150,000pcs (annual need between 300k to 2,300kpcs)
For permanent magnet sampling we need 500pcs or alternative 1,000pcs (please do not forget to offer your price and lead time based on express door to door)
Client of Neodymium Arc Magnets:
Would you please check your current best price and lead time of magnet 40 based on 25.000pcs per year and 5k per lot or based on your own recommendation regarding the lot size? Neodymium iron boron permanent magnets should be supplied magnetized and vacuum packed. Please inform about the validity period of your offer too.
Client of SmCo Magnets for High Vacuum Technology:
We are asked by our customer if we can supply the following SmCo magnets:
D12-0.1 x 18-0.1 mm; Coated with titanium (Ti) and gold (Au). The coating should be made by vaporisation technique. The total thickness of Ti+Au should be 5-10 µm (=0.005 to 0.010 mm). These magnets shall be used for high vacuum technology. What do you think? Can you realise it? There is only a need of a small quantity.
SmCo Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
Thank you for your enquiry. I am sorry to tell you that we can't make SmCo magnet with a coating Ti+Au. We always manufacture SmCo Magnets without coating.
